2003 BMW F650CS
20182 Miles
Front and Rear brake pads replaced and brakes bled.
Pretty simple project. On both brakes, get the pin out, get the pads out, push the pistons (one on the rear, two pistons on the front) back, stick the pads in, then put the pin back in. Each pins, of course has a retention clip, but getting the pins out was the most difficult part. I put some brake grease on the back of pads and on the pins.
New EBC HH pads
Getting the pin out from the front brake was easy. Used an old punch to push the pin out toward the wheel.
The front pad still had a little life left.
The rear brake was much worse.
Getting the pin out on the rear brake was much more difficult. The belt drive on the right side and the muffler on the left side.
Finally coming out.
The pads are in.
=)
20182 Miles
Front and Rear brake pads replaced and brakes bled.
Pretty simple project. On both brakes, get the pin out, get the pads out, push the pistons (one on the rear, two pistons on the front) back, stick the pads in, then put the pin back in. Each pins, of course has a retention clip, but getting the pins out was the most difficult part. I put some brake grease on the back of pads and on the pins.
New EBC HH pads
Getting the pin out from the front brake was easy. Used an old punch to push the pin out toward the wheel.
The front pad still had a little life left.
Finally coming out.
The pads are in.
=)
Comments