playing with the pipes... part ii - drilling the baffles

on
It's time to play with the new pipe. The goal is to get a better flow of air in the pipe. There are two ways to do this.

  1. Gronk Method - take the hole saw, get the baffles out, enlarge the baffle holes, then weld them back in. TOO MUCH WORK!
  2. Hillbilly Method - take the 1/2 drill and punch out the center.



first, i went shopping at home depot. got 1/2" drill bit (12" long) and a 1 & 1/4" diameter dowel rod.



i made a drill bit guide with the dowel rod.



then drilled them out.



tomorrow, i will mount them.

Comments

Post a Comment