Ninja Ready to GO!

12,400 miles

After having a bit of problem with chain, I finally got the extra links removed. Ane the chain was installed.

IMG_1990
IMG_1991

The front sprocket was changed with 15T. (The stock one is 14T.) 15T should give me around 7000rpm at 70 mph, I think. I had hard time getting the nut off. By the way, if you are looking for the socket to change the sprocket, get 27mm deep socket. I had to put 2x4 lumber in the wheel and over swing arm first. Then my 1/2inch breaker bar was not good enough. I have to put an extension on it. Then finally that nut came loose.
IMG_1993
IMG_1996

Today, I also changed the rear brake pads and replace the burnt license plate light.

Lastly, I went to get the bike inspected ($14.50) and it is good for another year!

Comments